Table of Contents
Advertisement
READ THIS INSTRUCTION MANUAL
SAFETY PRECAUTIONS
User Advisory
Failure to read, understand, and follow the instructions in this manual may result in damage to the unit, injury to operating
personnel, and poor equipment performance.
CAUTION! All internal adjustments and maintenance must be performed by qualified service personnel
When plugged in, there is high voltage present on terminals inside the machine space. Proper care must be taken if the electri-
cal control panels are opened to perform any kind of maintenance.
The material in this manual is for information purposes only. Its contents and the product it describes are subject to change
without notice. FARRAR makes no representations or warranties with respect to this manual. In no event shall FARRAR be held
liable for any damages, direct or incidental, arising out of or related to the use of this manual.
Important operating and/or maintenance instructions. Read the accompanying text carefully. Maintained or serviced
equipment must be turned off and locked out to prevent injury.
Always dissipate high or low temperatures, especially inside the control space before performing any maintenance on the unit.
Before performing maintenance, always do the following:
Use the proper protective equipment (clothing, gloves, goggles, etc.).
Dissipate extreme cold or heat and wear protective clothing.
Follow good hygiene practices.
Each individual is responsible for their own safety.
Lock
Do Not Touch
ULC SERIES INSTRUCTION MANUAL
Electrocution
02
Advertisement
Table of Contents
