Parallel Port Mode - Toshiba Satellite M40 User Manual

3. Click the OK button. If the character string you enter matches the
registered password, the password option is reset and the display
changes to:
If they do not match, the following message appears. You must repeat
step 1.
If you enter the password incorrectly three times in a row, the computer
need to shut off.
You will not be able to access the password option in the HW Setup. In this
case you must turn the power off and back on to retry the procedure.
4. Follow the same procedures described in the earlier section, How to set
the password, to set a new user password.
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device
Manager to make settings for the Parallel port.

Parallel Port Mode

The options in this tab are
Bi-directional
Display
This tab lets you customise your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted
Auto-Selected
LCD+AnalogRGB
User's Manual
Not registered
Incorrect Password!!!
Sets the port type to Extended Capabilities Port (ECP).
ECP
For most printers, the port should be set to
This setting should be used with some other parallel
Standard
devices.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Selects both the internal LCD and external monitor for
simultaneous display.
ECP and Standard Bi-directional
HW Setup and Passwords
.
ECP . (Default)
.
7-3