Toshiba Satellite M40 User Manual page 109

The Keyboard
Power save mode: Fn + F2
Pressing changes the power save mode.
Fn + F2
If you press , the Power Save Mode is displayed in a dialog box.
Fn F2
Continue holding down and press again to change the setting. You
can also change this setting through the Plugged in or Running on batteries
item of the Power Saver Properties window in Power Saver.
Standby: Fn + F3
When you press , the computer can enter Standby. To
avoid entering Standby unexpectedly, a dialog box appears for verification.
However, if you check the checkbox in the dialog box, it will not appear
from the next time.
Hibernation: Fn + F4
When you press , the computer can enter
Hibernation. To avoid entering Hibernation unexpectedly, a dialog box
appears for verification. However, if you check the checkbox in the dialog
box, it will not appear from the next time.
Display selection: Fn + F5
Press to change the active display device.
When you press these hot keys a dialog box appears. Only selectable
Fn F5
devices will be displayed. Hold down and press again to change the
Fn F5
device. When you release and , the selected device will change. If
LCD
you hold down the keys for three seconds the selection will return to .
Display Brightness: Fn + F6
Pressing decreases the display
brightness in increments. When you press these hotkeys, the current
setting will be displayed for two seconds by an icon. You can also change
this setting through the Monitor brightness item of the Power Save Mode
window in Power Saver.
User's Manual 5-4