Setup
This field displays
Password
User Password
This option allows you to set or reset the user password for power on
Not Registered
Registered
To enter a user password:
1. Select Registered to display the following prompt:
2. Enter a password of up to 10 characters (You can't use the following
characters: - ^ @ [ ] ; : , . / space). The character string you enter is
displayed as a string of asterisks. For example, if you enter a password
consisting of four characters, the display is shown as:
If you click the OK button before entering the password,
will appear on the display.
3. Click the OK button. The following message appears, allowing you to
verify the password.
4. If character strings match, the password is registered click OK button.
If they do not match, the following message appears. You must repeat
from step 1.
To delete a user password:
1. Select Not Registered to display the following prompt:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
If you click the OK button before entering the password,
appear on the display.
User's Manual
BIOS Version
Change or remove the password. (Default)
Set the password. A dialogue box will appear to let you
set the password.
Enter Password:
Enter Password: ****
Verify Password:
Entry Error!!!
Enter Password:
Enter Password: ****
HW Setup and Passwords
and date.
.
Not registered
Registered
will
7-2