3. INSTALLATION AND HANDLING
The camera is intended to be installed into an enclosure and may exhibit stray light effects if operated
outside of an enclosure.
Document M-008 Revision A. Approved for public release: Teledyne FLIR approved [FLIRGTC-SBA-018].
© 2023 Teledyne FLIR
The camera should not be opened.
The system is very susceptible to FOD-caused image artifacts.
The camera system is an electrostatic-sensitive device.
ESD control should be implemented during the handling.
BOSON+ CZ 14-75 USER MANUAL
Page 4