Table of Contents
Advertisement
24
11.3 Cleaning the condenser
If the symbol
Condenser flashes on the display, inspect the condenser and its compartment. If it is dirty, clean
it.
Do not touch the metal surface with bare hands. Risk of injury. Wear protective gloves. Clean carefully to avoid
damaging the metal surface.
To inspect:
1. Open the door. Pull the filter up.
2. Slide the release button on the bottom of the door to open the condenser door.
3. Turn the lever to unlock the condenser cover.
4. Lower the condenser cover.
5. If necessary, remove the fluff from the heat exchanger and its compartment. You can use a wet cloth and/or a vac-
uum cleaner with a brush attachment.
User manual
Warning
fig.X02249
fig.X02233
fig.X02250
fig.X02251
Advertisement
Table of Contents
