Condenser Door; Condenser Cover; Cleaning The Condenser; Cleaning The Drum - Electrolux TE1120 User Manual

2. Pull the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Push the plastic connection back in
and place the water container back
into position.
4. To continue the programme press the
Start/Pause button.

11.3 Cleaning the condenser

If the symbol Condenser flashes on
the display, the condenser and its
compartment must be cleaned.
To clean the condenser and its
compartment:
1. Open the door.
2. Move the release button on the
bottom of the door to open the

condenser door.

3. Turn 2 blockages to unlock the

condenser cover.

4. Lower the condenser cover.
5. Catch the handle and pull the
condenser out from the bottom
compartment. Move condenser
horizontally to do not spill remaining
water.
6. Clean the condenser in vertical
position over a basin or paddling.
Rinse through with a hand shower.
7. Put the condenser back inside the
bottom compartment.
8. Close the condenser cover.
9. Lock 2 blockages until they snap.
10. Close the condenser door.

11.4 Cleaning the drum

WARNING!
Disconnect the appliance
before you clean it.
ENGLISH 17