How To Remove The Joystick - Models With Electronic Joystick; How To Remove The Brake Pedal Assembly - Terex GTH08E-11500 Service And Repair Manual

September 2021
How to Remove the Joystick - How to R emove the Joy stick - Models with El ectr onic J oystick
Models with Electronic Joystick
1 Disconnect the battery from the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
2 Remove the side access panel.
3 Tag and disconnect the joystick wire harness
from the machine.
4 Remove the fasteners securing the joystick
mount panel to the side console.
5 Remove the fasteners securing the joystick to
the mount panel. Remove the joystick.
Part No. 1288232GT
Operator's Compartment
How to Remove the Brake Pedal How to R emove the Brake Pedal Ass embly
Assembly
1 Disconnect the battery from the machine.
2 Fully press and release the brake pedal a
minimum of 10 times to release the hydraulic
pressure in the brake system.
3 Tag, disconnect and plug the hydraulic hoses
at ports BP and BT of the secondary hydraulic
manifold. Cap the fittings.
4 Follow the hydraulic hose from port A of the
brake pedal manifold to the brake manifold.
Tag, disconnect and plug this hydraulic hose
at the brake manifold. Cap the fitting.
5 Remove the fasteners securing the brake
pedal assembly to the dash frame.
6 Gently rotate the brake pedal in an upwards
direction and slowly move the brake pedal
assembly away from the dash frame while
feeding all loose hoses through the opening of
the chassis.
GTH -844
™
Service and Repair Manual
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
35