a. Remove the single screw (M2x4) that secures the M.2 2280 solid-state drive to the system board.
b. Slide and remove the M.2 2280 solid-state drive from the solid-state drive slot on the system board.
c. Peel and remove the thermal pad mylar sticker.
6. Remove the
memory
module.
7. Remove the
WLAN
card.
8. Remove the
WWAN
card.
9. Remove the
heat
sink.
10. Remove the battery.
11. Remove the
system
fan.
12. Remove the
assembly inner
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
frame.
Removing and installing components
57