About this task
The following image indicates the location of the smart card reader and provides a visual representation of the installation
procedure.
Steps
1. Align and place the smart card reader on the palm-rest assembly.
2. Replace the two screws (M2x3) that secure the smart card reader to the palm-rest assembly.
3. Connect the smart card reader cable to the connector on the USH board.
Next steps
1. Install the
assembly inner
2. Install the battery.
3. Install the
WWAN
card.
4. Install the
WLAN
card.
5. Install the
base
cover.
6. Install the
microSD
card.
7. Install the
SIM
card.
8. Follow the procedure in
frame.
After working inside your
computer.
Removing and installing components
65