1. Manuals
  2. Brands
  3. Endress+Hauser Manuals
  4. Transmitter
  5. Deltabar S FMD76
  6. Operating instructions manual

Endress+Hauser Deltabar S FMD76 Operating Instructions Manual

Differential pressure transmitter
Hide thumbs Also See for Deltabar S FMD76:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
Deltabar S FMD76/77/78, PMD70/75
Differential pressure transmitter
8
BA294P/00/en/11.05
71009592
valid from
Software version 03.00
Hardware version 01.00

Advertisement

Table of Contents
loading

Related Manuals for Endress+Hauser Deltabar S FMD76

Summary of Contents for Endress+Hauser Deltabar S FMD76

  • Page 1 Operating Instructions Deltabar S FMD76/77/78, PMD70/75 Differential pressure transmitter BA294P/00/en/11.05 71009592 valid from Software version 03.00 Hardware version 01.00...
  • Page 2 Overview documentation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Overview documentation Device Documentation Content Remarks Deltabar S PROFIBUS PA Technical Information TI382P Technical data – The documentation is located on the ToF Tool CD. The CD is enclosed with every device ordered with the "HistoROM/M-DAT"...

  • Page 3: Table Of Contents

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Table of contents Table of contents Safety instructions ....4 Trouble-shooting ....64 Designated use .

  • Page 4: Safety Instructions

    Safety instructions Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Safety instructions Designated use The Deltabar S is a differential pressure transmitter for measuring differential pressure, flow and level. The manufacturer accepts no liability for damages resulting from incorrect use or use other than that designated.

  • Page 5: Notes On Safety Conventions And Icons

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Safety instructions Notes on safety conventions and icons In order to highlight safety-relevant or alternative operating procedures in the manual, the following conventions have been used, each indicated by a corresponding icon in the margin.

  • Page 6: Identification

    Identification Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Identification Device designation 2.1.1 Nameplate Deltabar S Order Code: Ser.-No.: Span Mat. P01-xMD7xxxx-18-xx-xx-xx-001 Fig. 1: Nameplate for Deltabar S Order code See the specifications on the order confirmation for the meanings of the individual letters and digits.

  • Page 7: Scope Of Delivery

    The device complies with the applicable standards and regulations as listed in the EC declaration of conformity and thus complies with the statutory requirements of the EC Directives. Endress+Hauser confirms the successful testing of the device by affixing to it the CE mark.

  • Page 8: Installation

    • To ensure optimal readability of the on-site display, it is possible to rotate the housing up to 380°. → See page 18, section 3.3.7 "Rotating the housing". • Endress+Hauser offers a mounting bracket for installing on pipes or walls. → See page 18, section 3.3.6 "Wall and pipe mounting".
  • Page 9 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Installation 3.3.1 Installation for flow measurement Note! For more information about flow measurement with the Deltabar S differential pressure transmitter and orifice plate or pitot tube, see also Technical Information TI297P Deltatop/Deltaset. Flow measurement in gases with PMD70/PMD75 –...
  • Page 10 Installation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Flow measurement in liquids with PMD70/PMD75 – P01-PMD75xxx-11-xx-xx-xx-002 Fig. 5: Measuring layout for flow measurement in liquids with PMD75 Orifice plate or pitot tube Shut-off valves Deltabar S, here PMD75 Separator Drain valves Three-valve manifold •...
  • Page 11 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Installation Level measurement in an open container with FMD76/FMD77 min. – P01-FMD76xxx-11-xx-xx-xx-003 Fig. 7: Measuring layout for level measurement in open containers with FMD76 Deltabar S, here FMD76 The negative side is open to atmospheric pressure •...
  • Page 12 Installation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Level measurement in a closed container with FMD76/FMD77 – max. min. P01-FMD76xxx-11-xx-xx-xx-004 Fig. 9: Measuring layout for level measurement in a closed container with FMD76 Shut-off valve Separator Drain valve Deltabar S, here FMD76 •...
  • Page 13 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Installation Level measurement in a closed container with superimposed steam with PMD 70/ PMD75 – max. min. P01-PMD75xxx-11-xx-xx-xx-005 Fig. 11: Measuring layout for level measurement in a container with superimposed steam with PMD75...
  • Page 14 Installation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA • Mount the Deltabar S direct on the container. → See also page 17, section 3.3.5 "Seal for flange mounting". • Always connect the negative side above the maximum level. • A condensate trap ensures constant pressure on the negative side.
  • Page 15 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Installation • When measuring in media with solid parts, such as dirty liquids, installing separators and drain valves is useful for capturing and removing sediment. Differential pressure measurement in gases, steam and liquids with FMD78 –...
  • Page 16 Vacuum application For applications under vacuum, Endress+Hauser recommends mounting the pressure transmitter underneath the lower diaphragm seal. A vacuum load of the diaphragm seal caused by the presence of filling oil in the capillaries is hereby prevented.
  • Page 17 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Installation 3.3.5 Seal for flange mounting P01-FMD7xxxx-11-xx-xx-xx-002 Fig. 19: Mounting the versions with flange or diaphragm seal Diaphragm Seal Warning! The seal is not allowed to press on the diaphragm as this could affect the measurement result.
  • Page 18 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA 3.3.7 Wall and pipe-mounting (optional) Endress+Hauser offers a mounting bracket for installing the device on pipes or walls. A bracket with mounting accessories for pipe mounting is included with the device. Note! When using a valve block, the block's dimensions must be taken into account.

  • Page 19: Post-Installation Check

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Installation Post-installation check After installing the device, carry out the following checks: • Are all screws firmly tightened? • Are the housing covers screwed down tight? • Are all locking screws and vent valves firmly tightened?

  • Page 20: Wiring

    Wiring Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Wiring Connecting the device Note! • When using the measuring device in hazardous areas, installation must comply with the corresponding national standards and regulations and the Safety Instructions (XAs) or Installation or Control Drawings (ZDs).
  • Page 21 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Wiring 4.1.1 Connecting devices with Harting plug Han7D Deltabar S + – – Han7D – P01-xMD7xxxx-04-xx-xx-xx-000 Fig. 24: Left: electrical connection for devices with Harting plug Han7D Right: view of the plug at the device 4.1.2...

  • Page 22: Connecting The Measuring Unit

    Wiring Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Connecting the measuring unit Note! For further information on the network structure and earthing and for further bus system components such as bus cables, see the relevant documentation, e.g. Operating Instructions BA034S "Guidelines for planning and commissioning PROFIBUS DP/PA" and the PNO Guideline.

  • Page 23: Post-Connection Check

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Wiring 4.2.5 Overvoltage protection (optional) Devices showing version "M" in feature 100 "Additional options 1" or feature 110 "Additional options 2" in the order code are equipped with overvoltage protection (see also Technical Information TI382P "Ordering information".

  • Page 24: Operation

    Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Feature 20 "Output; operation" in the order code provides you with information on the operating options available to you. Versions in the order code Operation PROFIBUS PA; external and LCD Via on-site display and 1 key on the exterior of the device PROFIBUS PA;...

  • Page 25: Operating Elements

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Symbol Meaning Tendency symbol (increasing) The primary value of the Transducer Block is increasing. Tendency symbol (decreasing) The primary value of the Transducer Block is decreasing. Tendency symbol (constant) The primary value of the Transducer Block has remained constant over the past few minutes.
  • Page 26 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA 5.2.2 Function of operating elements Operating key(s) Meaning Position adjustment (zero point correction). → See also the following Section "Performing position adjustment on site.'' Zero P02-xxxxxxxx-19-xx-xx-xx-107 Set address in the bus. → See also Page 43, Section 5.8 "Configuring the device address".

  • Page 27: Profibus Pa Communication Protocol

    Special configuration and operating programs from various manufacturers are available for configuring the device, such as the Endress+Hauser operating program ToF Tool (→ see Page 40, Section 5.4). This operating program makes it possible to configure PROFIBUS PA and the device- specific parameters.
  • Page 28 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA 5.3.4 Cyclic data exchange Deltabar S block model Measured variable Sensor Display Physical Block Signal evaluation with scaling Device-specific characteristics, e.g. software revision SEL. DISPLAY VAL. PA_INPUT_VALUE MEASURED VALUE Main Process Analog Input Block...
  • Page 29 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Description of parameters Parameter name Description This parameter shows the digital output value of the Analog Input Block. Menu path: PROFILE VIEW → ANALOG INPUT BLOCK → AI PARAMETER PA INPUT VALUE This value is transmitted from the PLC to Deltabar S.
  • Page 30 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Modules for the cyclic data diagram Deltabar S makes the following modules available for the cyclic data diagram: • Main process value Depending on the operating mode selected, a pressure, level or flow value is transmitted here.
  • Page 31 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Status codes Deltabar S supports the following status codes for the main process value, 2nd cyclic value and 3rd cyclic value: Status Device Meaning Main 2nd cyclic 3rd cyclic code status process...
  • Page 32 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA For this, you have the following options: • A device description (DD) • A configuration program in the master that accesses the parameters via the slot and index addresses (e.g. ToF Tool) •...
  • Page 33 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation 5.3.6 Slot/index tables The device parameters are listed in the following tables. You can access the parameters by means of the slot and index number. The individual blocks each contain standard parameters, block parameters and manufacturer-specific parameters.
  • Page 34 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Parameter Slot Index Object type Data type Size (byte) Storage Read Write Class DIAGNOSIS Simple Octet String DIAG_EXT. Simple Octet String DIAG_MASK Simple Octet String DIAG_MASK_EXT. Simple Octet String DEV_CERTIFIC. Simple Visible String INSERT PIN NO.
  • Page 35 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Analog Input Block Parameter Slot Index Object type Data type Size (byte) Storage Read Write Class Analog Input Block standard parameters BLOCK_OBJECT Record DS-32 ST_REV Simple Unsigned16 TAG_DESC Simple Visible String STRATEGY...
  • Page 36 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Parameter Slot Index Object type Data type Size (byte) Storage Read Write Class PRIM_VALUE_UNIT Simple Unsigned16 PRIM_VALUE_TYPE Simple Unsigned16 MAT. MEMBRANE Simple Unsigned16 FILLING FLUID Simple Unsigned16 SEAL TYPE Simple Unsigned16 PROC.CONN.TYPE...
  • Page 37 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Parameter Slot Index Object type Data type Size (byte) Storage Read Write Class CUSTOMER UNIT F Simple Visible String CUST.UNIT FACT.F Simple Float CUSTOMER UNIT P Simple Visible String CUST.UNIT FACT.P Simple Float POS.ZERO ADJUST...
  • Page 38 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Parameter Slot Index Object type Data type Size (byte) Storage Read Write Class MASS UNIT Simple Unsigned16 CUST.UNIT FACT.M Simple Float CUSTOMER UNIT M Simple Visible String HEIGHT UNIT Simple Unsigned16 CUST.UNIT FACT.H...
  • Page 39 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation 5.3.7 Data format In the case of PROFIBUS PA, the cyclic transmission of analog values to the PLC is effected in data blocks 5 bytes long. The measured value is portrayed in the first 4 bytes in the form of floating point numbers in accordance with IEEE standard.

  • Page 40: Tof Tool Operating Program

    ToF Tool operating program The ToF Tool is a graphic and menu-guided operating program for measuring devices from Endress+Hauser. It is used for supporting the commissioning, data storage, signal analysis and documentation of the devices. The following operating systems are supported: WinNT4.0, Win2000 and Windows XP.

  • Page 41: Fieldcare

    FieldCare FieldCare is an Endress+Hauser asset management tool based on FDT technology. With FieldCare, you can configure all Endress+Hauser devices as well as devices from other manufacturers that support the FDT standard. The following operating systems are supported: WinNT4.0, Win2000 and Windows XP.
  • Page 42 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA τ Zero Sensor Display S D A 0 1 2 3 4 5 6 7 8 Address P01-xxxxxxxx-19-xx-xx-xx-110 ® Electronic insert with optional HistoROM /M-DAT memory module ® Optional HistoROM /M-DAT ®...

  • Page 43: Locking/Unlocking Operation

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Locking/unlocking operation Once you have entered all the parameters, you can lock your entries against unauthorised and undesired access. You have the following possibilities for locking/unlocking the operation: • Via a DIP-switch on the electronic insert, locally on the display.

  • Page 44: Configuring The Device Address

    Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Configuring the device address Note the following points: • An address must be assigned to every PROFIBUS PA device. Only when the address is configured correctly will the device be recognised by the control system/master.

  • Page 45: Factory Setting (Reset)

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Operation Configuring the new address using the ToF Tool. DIP switch 8 (SW/HW) is set to "On" (SW): Using the "File" menu, select the "New Device List" option. The "Open Connection Wizard" screen is displayed.
  • Page 46 Operation Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Reset code Description and effect 1 or 40864 Total reset – This reset resets the following parameters: – POSITION ADJUSTMENT function group – BASIC SETUP function group – EXTENDED SETUP function group –...

  • Page 47: Commissioning

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning Commissioning Note! The device is configured for the Pressure measuring mode as standard. The measuring range and the unit in which the measured value is transmitted, as well as the digital output value of the Analog Input Block OUT, correspond to the data on the nameplate.

  • Page 48: Selecting Language And Measuring Mode

    Commissioning Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Selecting language and measuring mode The MEASURING MODE parameter is displayed in the ToF Tool in the QUICK SETUP menus and in the BASIC SETUP function group (menu path: MANUFACTOR VIEW → SETTINGS → BASIC SETUP).

  • Page 49: Position Adjustment

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning Position adjustment Due to the orientation of the device, there may be a shift in the measured value, i.e. when the container is empty, the measured value parameter does not display zero. There are three options to choose from when performing position adjustment.

  • Page 50: Flow Measurement

    Commissioning Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Flow measurement 6.5.1 Preparatory steps Note! • The Deltabar S PMD70 or PMD75 is usually used for flow measurement. • Before calibrating the Deltabar S, the impulse piping must be cleaned and the device filled with fluid.
  • Page 51 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning 6.5.2 Information on flow measurement In the "Flow" measuring mode, the device determines a volume or mass flow value from the differential pressure measured. The differential pressure is generated by means of primary devices such as pitot tubes or orifice plates and depends on the volume or mass flow.
  • Page 52 Commissioning Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA 6.5.3 Quick Setup menu for the Flow measuring mode MEASURED VALUE QUICK SETUP MANUFACTOR VIEW PROFILE VIEW MEASURING MODE Pressure Level Flow POS. ZERO ADJUST MAX FLOW MAX. PRESS. FLOW DAMPING VALUE...

  • Page 53: Level Measurement

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning Level measurement 6.6.1 Preparatory steps Open container Note! • The Deltabar S PMD70, PMD75, FMD76 and FMD77 are usually used for level measurement in an open container. • FMD76 and FMD77: the device is ready for calibration immediately after opening a shut-off valve (may or may not be present).
  • Page 54 Commissioning Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Closed container Note! • All Deltabar S versions are suitable for level measurement in closed containers. • FMD76 and FMD77: the device is ready for calibration immediately after opening a shut-off valve (may or may not be present).
  • Page 55 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning Containers with superimposed steam Note! • All Deltabar S versions are suitable for level measurement in containers with superimposed steam. • FMD76 and FMD77: the device is ready for calibration immediately after opening a shut-off valve (may or may not be present).
  • Page 56 Commissioning Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA 6.6.2 Information on level measurement Three level types are available for level measurement, namely: "Linear", "Pressure Linearized" and "Height Linearized". – Linear: select this level type if the measured variable is in direct proportion to the measured pressure.
  • Page 57 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning 6.6.3 Quick Setup menu for the Level measuring mode Note! Some parameters are only displayed if other parameters are appropriately configured. For example, the EMPTY CALIB. parameter is not displayed unless the "Linear" option was selected for the LEVEL MODE parameter and the "Wet"...

  • Page 58: Differential Pressure Measurement

    Commissioning Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Differential pressure measurement 6.7.1 Preparatory steps Note! • The Deltabar S PMD70, PMD75 and FMD78 are usually used for differential pressure measurement. • FMD78: the device is ready for calibration immediately. • PMD70 and PMD75: before calibrating the device, the impulse piping must be cleaned and the device filled with fluid.
  • Page 59 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning 6.7.2 Information on differential pressure measurement Note! • There is a Quick Setup menu for each of the measuring modes Pressure, Level and Flow which guides you through the most important basic functions. With the setting in the MEASURING MODE parameter, you specify which Quick Setup menu should be displayed.

  • Page 60: Scaling Out Value

    Commissioning Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Scaling OUT value In the Analog Input Block, the input value or input range can be scaled in accordance with the automation requirements. Example: The measuring range 0...500 mbar should be rescaled to 0...10000.

  • Page 61: System Units (Set Unit To Bus)

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning System units (SET UNIT TO BUS) The on-site display of Deltabar S and the MEASURED VALUE (ToF Tool) display the same value as standard. The bargraph on the on-site display corresponds to the standardised value of the Analog Input Block.

  • Page 62: System Integration

    Each device receives an ID number from the Profibus User Organisation (PNO). The name of the Device Master File (GSD) is derived from this. For Endress+Hauser, this ID No. starts with the manufacturer ID "15xx". The Device Master Files (GSD) for Endress+Hauser devices can be acquired in the following manner: •...
  • Page 63 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Commissioning Directory structure of GSD files from Endress+Hauser For Endress+Hauser field devices with PROFIBUS PA interface, all the data which are needed for configuration are contained in a compressed file. After unpacking the file, the following structure is generated: Deltabar_S/PA/Profile3/Revision1.0/...

  • Page 64: Maintenance

    Maintenance Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Maintenance Deltabar S requires no maintenance. Exterior cleaning Please note the following points when cleaning the device: • The cleaning agents used should not attack the surface and the seals. • Mechanical damage to the membrane, e.g. due to pointed objects, must be avoided.
  • Page 65 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Trouble-shooting Code Error type/ Message/description Cause Measure Priority NA 64 110 (A110) Alarm B>Checksum error in EEPROM: – The supply voltage is disconnected – Reestablish supply voltage. Perform configuration segment when writing. reset (Code 1 or 40864) if necessary.
  • Page 66 Trouble-shooting Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Code Error type/ Message/description Cause Measure Priority NA 64 700 (W700) Warning C>Last configuration not stored – An error occurred when writing or – Perform reset (Code 1 or 40864) reading configuration data or the and carry out calibration again.
  • Page 67 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Trouble-shooting Code Error type/ Message/description Cause Measure Priority NA 64 715 (E715) Error C>Sensor over temperature – The temperature measured in the – Reduce process temperature/ sensor is greater than the upper ambient temperature.
  • Page 68 Trouble-shooting Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Code Error type/ Message/description Cause Measure Priority NA 64 727 (E727) Error C>Sensor pressure error - – Electromagnetic effects are greater – Block off electromagnetic effects or overrange than specifications in the technical eliminate source of disturbance.
  • Page 69 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Trouble-shooting Code Error type/ Message/description Cause Measure Priority NA 64 739 (A739) Alarm B>Measurement error – Fault in the main electronics. – Briefly disconnect device from the power supply. – Main electronics defect.

  • Page 70: Response Of Outputs To Errors

    Trouble-shooting Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Response of outputs to errors The device differentiates between the message types "Alarm", "Warning" and "Error". → See the following table and Page 64, Section 8.1 "Messages". Output A (Alarm) W (Warning)

  • Page 71: Confirming Messages

    "Spare parts" contains all the spare parts listed with their order numbers. You can order them from Endress+Hauser for repairs on your Deltabar S. As far as necessary, the spare parts also include replacement instructions.

  • Page 72: Spare Parts

    Trouble-shooting Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Spare Parts The following pages list all the spare parts with order numbers which you can order from Endress+Hauser to repair the Deltabar S. When ordering spare parts, always quote the serial number indicated on the nameplate. The spare parts number is embossed on every spare part.
  • Page 73 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Trouble-shooting 8.6.1 Spare parts for PMD70, PMD75, FMD76, FMD77, FMD78 See the following pages for flanges and sensors. P01-xMx7xxxx-09-xx-xx-xx-000 Endress+Hauser...
  • Page 74 Trouble-shooting Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Housing (with retaining ring and housing seal, without cover) 52020430 Aluminium T14 housing, M20x1.5, not for EEx d/XP 52020488 Aluminium T14 housing, M20x1.5, HART, with 3 push buttons external, not for EEx d/XP 52020489 Aluminium T14 housing, M20x1.5, PROFIBUS PA/Foundation Fieldbus, with push button external,...
  • Page 75 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Trouble-shooting 8.6.2 Spare parts for PMD70 P01-xMD7xxxxx-09-xx-xx-xx-001 Flanges for PMD70 52020495 Flange 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, C22.8 (2 pieces) 52020496 Flange 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, AISI 316L (2 pieces) 52020497 Flange 1/4 –...
  • Page 76 Trouble-shooting Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Sensor module for Deltabar S PMD70 (Position 50) Approval: For non-hazardous areas ATEX II 1/2 G EEx ia IIC T6 ATEX II 1/2 G EEx ia IIC T6, overspill protection WHG ATEX II 1/2 D...
  • Page 77 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Trouble-shooting 8.6.3 Spare parts for PMD75 Measuring ranges 100 mbar, 500 mbar, 3 bar, 16 bar, 40 bar P01-xMD7xxxxx-09-xx-xx-xx-002 Measuring ranges 10 mbar and 30 mbar P01-xMD7xxxxx-09-xx-xx-xx-002 Endress+Hauser...
  • Page 78 Trouble-shooting Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Flanges for measuring ranges 100 mbar, 500 mbar, 3 bar, 16 bar, 40 bar 52020667 Flange 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, C22.8 (2 pieces) 52020668 Flange 1/4 – 18 NPT IEC 61518, mounting: 7/16 – 20 UNF, AISI 316L (2 pieces) 52020669 Flange 1/4 –...
  • Page 79 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Trouble-shooting Sensor module for Deltabar S PMD75 (Position 50) Approvals: For non-hazardous areas ATEX II 1/2 G EEx ia IIC T6 ATEX II 1/2 G EEx ia IIC T6, overspill protection WHG ATEX II 1/2 D...

  • Page 80: Returning The Device

    Please enclose the following when returning the device: • Please fill out completely and sign the "Declaration of Contamination". It is only then possible for Endress+Hauser to inspect or repair the returned device. • The chemical and physical properties of the fluid.

  • Page 81: Software History

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Technical data Software history Software version/ Changes software Changes documentation valid as of 03.00/01.01.2005 Orginal software. Compatible with: ® – Update ToF Tool – Field Tool Package, version 2.03 or higher Technical data For technical data, please refer to the Technical Information TI382P for Deltabar S.
  • Page 82 Appendix Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Measured value GROUP SELECTION MANUFACTOR VIEW OPERATING MENU MEASURING MODE SETTINGS Pressure Level Flow POS. ZERO ADJUST POS. ZERO ADJUST POS. ZERO ADJUST POSITION ADJUSTMENT BASIC SETUP DAMPING VALUE EMPTY CALIB. MAX. FLOW MEASURING MODE FULL CALIB.
  • Page 83 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Appendix Height Volume Mass HEIGHT UNIT UNIT VOLUME MASS UNIT Continuation CUTOMER UNIT H CUSTOMER UNIT V CUSTOMER UNIT M BASIC SETUP "Level", see also the previous page CUST. UNIT FACT. H CUST. UNIT FACT. V CUST.
  • Page 84 Appendix Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA DISPLAY EXTENDED SETUP LINEARISATION TOTALIZER SETUP Level measuring Flow measuring mode only mode only Pressure Level Flow MENU DESCRIPTOR TEMP. ENG UNIT TEMP. ENG UNIT TEMP. ENG UNIT TANK CONTENT MIN TOTALIZER 1 UNIT SEL.
  • Page 85 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Appendix TRANSMITTER INFO PROCESS INFO INFO TRANSMITTER DATA PROCESS CONNECTION SENSOR DATA PROCESS VALUE PEAK HOLD INDICATOR Pressure Level Flow DEVICE NAME STR. DEVICE SERIAL No Pmax PROC. CONN. SENSOR SER. NO. COUNTER:P > Pmax...
  • Page 86 Appendix Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA PROFILE VIEW PHYSICAL BLOCK OPERATION DIAGNOSTICS PB STANDARD PARAM. PB PARAMETER PB E+H PARAMETER SIMULATION MESSAGES USER LIMITS ENTER RESET CODE SIMULATION MODE ALARM STATUS Pmin ALARM WINDOW BLOCK OBJECT SOFTWARE VERSION...
  • Page 87 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Appendix TRANSDUCER BLOCK ANALOG INPUT BLOCK TB STANDARD PARAM. TB PARAMETER AI STANDARD PARAM. AI PARAMETER BLOCK OBJECT SENSOR PRESSURE BLOCK OBJECT BATCH MODE BLK PRIMARY VALUE MODE BLK ST_REV SCALE IN ST_REV...

  • Page 88: Patents

    Appendix Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA 10.2 Patents This product may be protected by at least one of the following patents. Further patents are pending. • DE 203 11 320 U1 • US 6,631,644 A1 i EP 1 299 701 B1 •...

  • Page 89: Index

    Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Index Index Acyclic data exchange ......31 Measuring layout for flow measurement.
  • Page 90 Deltabar S FMD76/77/78, PMD70/75 with PROFIBUS PA Index Endress+Hauser...
  • Page 91 Erklärung zur Kontamination und Reinigung Please reference the Return Authorization Number (RA#), obtained from Endress+Hauser, on all paperwork and mark the RA# clearly on the outside of the box. If this procedure is not followed, it may result in the refusal of the package at our facility.
  • Page 92 www.endress.com/worldwide BA294P/00/en/11.05 71009592 CCS/FM+SGML6.0 71009592...

This manual is also suitable for:

Deltabar s fmd77Deltabar s fmd78Deltabar s pmd70Deltabar s pmd75

Table of Contents