NordicTrack COMMERCIAL 1250 User Manual page 16

16. Identify the Right Base Cover (98). Slide the
Right Base Cover under the Belly Pan Wire (80)
and onto the Upright Base (101). Make sure
that the Right Base Cover is under the Belly
Pan Wire.
Repeat this step on the left side of the tread-
mill with the Left Base Cover (not shown).
Note: There is not a wire on the left side.
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included tools in a secure
place; one or more of the tools may be needed to make adjustments to the treadmill in the future. Note: Extra
hardware may be included.
16
98
16
80
101