Greenheck MOA Installation, Operation And Maintenance Manual page 19

d. Connect motors to each other using the ethernet cables working in a snake pattern from the bottom left, to
the right.
Step 17. Install power panel and control panel within X inches of each other and within X feet from the array.
a. Connect the power panel and the control panel together with the provided cord.
b. Connect the power cable to each of the junction boxes and route the cables to the power panel.
Because of the possible danger to person(s) or property from accidents which may result from the improper use of
the products, it is important that correct procedures be followed. Proper installation, maintenance and operation
procedures must be observed. Follow instructions in all manuals. Inspections should be made as necessary to
assure safe operation under prevailing conditions. Proper guards and other suitable safety devices or procedures
as may be desirable or as my be specified in safety codes should be provided and are neither provided by, nor
are the responsibility of the manufacturer. This unit and its associated equipment must be installed, adjusted and
maintained by qualified personnel who are familiar with the construction and operation of all equipment in the
system and the potential hazards involved.
®
CAUTION
Modular Open Array 19