Greenheck MOA Installation, Operation And Maintenance Manual page 16

Step 13: When all panels and screws are installed, go back around to all the screws and check that they are tight.
Step 14: Fasten layer channel (L) to the top and bottom of opening through to the fan panels (A) and (F) and end
panels (E) using the 1/4 x 1/2 inch screws PN 416081.
a. Use customer supplied hardware through the second set of holes on the horizontal reinforcement (O) in the
floor and ceiling.
F
O
F
A
E
O
O
Step 15: Fasten the panel support angles (J) between each panel with the flange.
J
J J J J J J
16 Modular Open Array
®