Greenheck MOA Installation, Operation And Maintenance Manual page 10

Step 8: Assemble end cap layer channel (N) to layer channel (L) and join sections together loosely with PN 416081
screws. Then set on top of panels.
a. Connect with screws through the top of end panel (E), then fan panel (A), and spacer panel (F) and into layer
channel (L).
M
N
E
A
F
L
F
A
F
F
A
K
E
K
K
b. Secure end cap layer channel (N) to wall from the back side, as shown in image below.
c. Add layer channel connector (M) to splice next layer channel (L) using PN 416081 screws.
10 Modular Open Array
®