Name Of Parts; About The Display Panel; About The Screen Switch Button (Left/Right) - Fujitsu UTY-DMMUM Operating Manual

] 1

1-3. Name of parts

• Press the button lightly with a finger. It may cause a
failure if pressed with excessive force.
• Do not press the screen too hard. It may cause a failure.
(1)
(2)
(3)
(4)
(5)
(1) Display panel (with backlight) ......................... (See 1-3-1.)
(2) Screen switch button (Left) ............................ (See 1-3-2.)
(3) Menu button ................................................... (See 1-3-3.)
(4) Cancel button ................................................. (See 1-3-4.)
(5) Cursor button ................................................. (See 1-3-5.)
(6) Screen switch button (Right) .......................... (See 1-3-2.)
(7) Power indicator .............................................. (See 1-3-7.)
(8) On/Off button .................................................. (See 1-3-8.)
(9) Enter button .................................................... (See 1-3-6.)

1-3-1. About the Display panel

·
Display may change depending on the operation or setting.
·
This can set the brightness, contrast and automatic light-off
time of the backlight. Refer to [9. SUBMENU SETTING].
Notice
While the backlight is off by the automatic light-off, the
¿ rst button operation does not work and the backlight
illuminates.
While the backlight is set to "Off", it is effective from the
¿ rst button.
Ex.) "Monitor" screen
Monitor
Room 1
Room 4
Cool Room 7
All
Min.heat Economy
Menu
Operation
En-3
9380221005_en.indd 3
CAUTION
Mo 10:00AM
Room 2 Room 3
Room 5 Room 6
Room 8
All O.U.
Low noise
Schedule RC prohibit
Function Schedule
Ex.) "Function" screen
Function
Min.heat (All)
Economy (All)
O.U. low noise
Schedule select
Back:
Operation
This product uses a Bitmap font made and developed by
Ricoh Co.,Ltd.
(6)
1-3-2. About the Screen switch button
(7)
(Left/Right)
(8)
·
While the screen name or setting items are displayed in the
(9)
black field under the screen, the screen can be switched
to that screen by pressing the Screen switch button (Left/
Right).
Ex.) "Operation" screen
Operation
Room 1
On-Off
Cancel:
Screen switch
button (Left)
Operation
Room 1
Cancel:
On-Off/Mode/Set temp.
Schedule 1
Setting:
Schedule
Mode Set temp.
78
Off Cool
OK:
Fan/Min.heat/Economy
Screen switch
button (Right)
Fan Min.heat Economy
Off
High
OK:
Mo 10:00AM
Disable
Disable
Disable
Mo 10:00AM
°F
Mo 10:00AM
Off
8/11/2010 11:55:17 AM