Table of Contents
Advertisement
MS-6758 ATX Mainboard
D-Bracket™ 2 Connector: JLED1 (Optional)
The mainboard comes with a JLED1 connector for you to connect to D-
Bracket™ 2. D-Bracket™ 2 is a USB Bracket that supports both USB1.1 & 2.
0 spec. It integrates four LEDs and allows users to identify system problem
through 16 various combinations of LED signals. For definitions of 16 signal
combinations, please refer to D-Bracket™ 2 in Chapter 1.
JLED1 Pin Definition
Pin
Signal
1
DBG1 (high for green color)
2
DBR1 (high for red color)
3
DBG2 (high for green color)
4
DBR2 (high for red color)
5
DBG3 (high for green color)
6
DBR3 (high for red color)
7
DBG4 (high for green color)
8
DBR4 (high for red color)
9
Key (no pin)
10
NC
Connected to JLED1
2-26
Connected to JUSB2
+
10
2
JLED1
1
9
LEDs
Advertisement
Table of Contents
