Installing Ddr Modules - MSI 875P Neo Manual

MS-6758 ATX Mainboard
channelDDR DIMMs. However, the same type and density memory modules
are necessary while using dual-channel DDR, or instability may happen.
Please refer to the following table for detailed dual-channel DDR. Other
combination not listed below will function as single-channel DDR.
DIMM1 (Ch A) DIMM2 (Ch A) DIMM3 (Ch B) DIMM4 (Ch B)
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The module
will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply inserted
in the socket.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-8
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB
Notch
Volt
System Density
256MB~2GB
256MB~2GB
512MB~4GB