D-Bracket™ 2 Connector: Jled1; Irda Infrared Module Header: Jir1 - MSI MS-6570E User Manual

MS-6570E ATX Mainboard
D-Bracket™ 2 Connector: JLED1
The mainboard comes with a JLED1 connector for you to connect to D-Bracket™
2. D-Bracket™ 2 is a USB Bracket that supports both USB1.1 & 2.0 spec. It integrates
four LEDs and allows users to identify system problem through 16 various combina-
tions of LED signals.

IrDA Infrared Module Header: JIR1

The connector allows you to connect to IrDA Infrared module. You must config-
ure the setting through the BIOS setup to use the IR function. JIR1 is compliant with
Intel Front Panel I/O Connectivity Design Guide.
®
JLED1 Pin Definition
Pin Signal
1 DBG1 (high for green color)
2 DBR1 (high for red color)
3 DBG2 (high for green color)
4 DBR2 (high for red color)
5 DBG3 (high for green color)
6 DBR3 (high for red color)
7 DBG4 (high for green color)
8 DBR4 (high for red color)
9 Key
10 NC
Connected to JLED1
Connected to JUSB1
or JUSB2
2-22
JLED1
2 10
1
9
2 6
1 5
JIR1
JIR1 Pin Definition
Pin Signal
1 NC
2 NC
3 VCC5
4 GND
5 IRTX
6 IRRX
D-Bracket™ 2 (Optional)
LEDs