Introduction; Features - Oki C910n User Manual

I
NTRODUCTION
Congratulations on buying an Oki colour printer. Your new printer is designed with
advanced features to give you clear, vibrant colour prints and crisp black and white pages
at high speed on a range of print media for the office.
There are two different models available: C910n and C910dn, where n denotes networking
capability and d denotes duplex unit installed.
F
EATURES
The following features are standard on all models:
> 1200 x 600 dpi (dots per inch) print resolution for high quality image production
showing the finest detail
> ProQ2400 multi level technology produces subtler tones and smoother gradations of
colour to lend photographic quality to your documents
> Single Pass Colour Digital LED technology for high speed processing of your printed
pages
> Hard disk drive enables spooled and verified printing
> 10Base-T, 100Base-TX and 1000Base-T network connection lets you share this
valuable resource among users on your office network
> USB 2.0 and parallel (IEEE-1284) interfaces
> PCL, PS, IBM PPR, Epson FX emulations
> "Ask Oki" – a user-friendly function that gives a direct link from your printer driver
screen (but not illustrated in this guide) to a dedicated web site specific to the exact
model you are using. This is where you will find all the advice, assistance and
support you could need to help you get the best possible results from your Oki
printer.
Additionally, the following optional features are available:
> Automatic two-sided (duplex) printing for economical use of paper and compact
printing of larger documents
NOTE
This optional feature is only applicable to the C910n.
> Additional paper trays for loading a further 530 sheets at a time to reduce operator
intervention, or different paper stocks for letterhead stationery, alternative paper
sizes or other print media:
> Standard 2nd/3rd Tray (530 sheets each)
> High Capacity Feeder (HCF) (1590 sheets)
NOTE
1. Tray configurations are: Tray 1 only, Tray 1 + 2nd Tray, Tray 1 + 2nd Tray + 3rd
Tray, Tray 1 + HCF, Tray1 + 2nd Tray + HCF
> Additional memory
> Finisher (for stapling printer output)
> Punch unit (to extend Finisher functionality)
> Printer cabinet
Introduction > 7