Follow these steps to change the scan resume condition.
l.
Press VFO.
2.
Hold F for at least 1 second. FUNC flashes.
3.
Press MR. The HTX-212 displays SC and the current option.
ti
Resumes scanning in 10 seconds
cr
Resumes scanning after the carrier drops and the
scan resume delay expires
SE
Does not resume scanning
4.
Rotate TUNE, or press UP or DOWN on the microphone, to
select the desired option.
5.
Press MR to save the setting.
Setting the Scan Resume Delay
l.
Press VFO.
2.
Hold Е for at least 1 second. FUNC flashes.
3.
Press MR.
4
6.
Press MR to save the setting.
22