Using CALL
The transceiver's call memory lets you quickly recall a specific
frequency in memory Channel 2.
Note: See "Using M-SAVE (Memory Save)" on Page 25 for more
information about storing a frequency in memory channel 2.
Press
to recall the stored frequency at any time. The fre-
CALL
quency flashes.
Press
again and the last selected frequency appears.
CALL
Using SCAN
Press
to scan incoming signals.
SCAN
appears and the
SCAN
transceiver stops for 5 seconds on each channel when it detects
a signal.
To stop scanning, press
or the PTT button on the micro-
SCAN
phone.
disappears.
SCAN
22