Table of Contents
Advertisement
CONNECTING TO YOUR VEHICLE'S POWER
Black Wire
To Negative( – )
Red Wire
To Positive(+)
Follow these steps to power the HTX-212 in your vehicle.
l.
Connect the black wire to your vehicle battery's negative (—)
terminal or to a metal part of the vehicle's frame. Be sure the
metal part is not insulated from the vehicle's frame by a
plastic part.
2.
Connect the red wire to a source of voltage that turns on and
off with the ignition and that can handle the transceiver's
10-amp maximum power draw.
Or, if you do not want the HTX-212 to turn on and off with
your vehicle's ignition, connect the red wire directly to the
battery's positive (4) terminal.
Note: You might need to connect the red wire directly to the
battery if you experience ignition noise.
Advertisement
Table of Contents
