Lan Port Leds - Lenovo ThinkEdge SE350 V2 System Configuration Manual

9 NMI button
Press this button to force a nonmaskable interrupt to the processor. You might have to use a pen or the end
of a straightened paper clip to press the button. You can also use it to force a blue-screen memory dump.
Use this button only when you are directed to do so by Lenovo Support.

LAN port LEDs

This section provides information on LEDs of the Ethernet LAN ports.
Figure 15. LAN port LEDs of the 10/25GbE I/O module
Figure 16. LAN port LEDs of the 1GbE I/O module
Table 12. LAN port LEDs
"10/25GbE SFP28 connectors" on page 30
1
"2.5GbE RJ-45 connectors" on page 31
2
10/25GbE SFP28 connectors link LED (yellow or green) and activity LED (green)
Figure 17. LEDs of 10/25GbE SFP28 connectors
LED Description
Network link
1
LED • Off: Network link is disconnected.
• Yellow: 25 GbE • On: Network link is connected.
• Green: 10 GbE
Network activity
2
• Blinking: The network is connected and active.
LED (green)
ThinkEdge SE350 V2 System Configuration Guide
30
"XCC system management port link LED and activity
3
LED (green) " on page 31
"1GbE RJ-45 connectors" on page 31
4