Safety Inspection Checklist - Lenovo ThinkEdge SE350 V2 System Configuration Manual

Hide thumbs Also See for ThinkEdge SE350 V2:

Table of Contents

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Safety inspection checklist

Use the information in this section to identify potentially unsafe conditions with your server. As each machine

was designed and built, required safety items were installed to protect users and service technicians from

injury.

Note: This device is not intended for use in the direct field of view at visual display workplaces. To avoid

incommoding reflections at visual display workplaces, this device must not be placed in the direct field of

view.

CAUTION:

This equipment must be installed or serviced by trained personnel, as defined by the NEC, IEC 62368-

1 & IEC 60950-1, the standard for Safety of Electronic Equipment within the Field of Audio/Video,

Information Technology and Communication Technology. Lenovo assumes you are qualified in the

servicing of equipment and trained in recognizing hazards energy levels in products. Access to the

equipment is by the use of a tool, lock and key, or other means of security, and is controlled by the

authority responsible for the location.

Important: Electrical grounding of the server is required for operator safety and correct system function.

Proper grounding of the electrical outlet can be verified by a certified electrician.

Use the following checklist to verify that there are no potentially unsafe conditions:

1. Make sure that the power is off and the power cord is disconnected.

2. Check the power cord.

• Make sure that the third-wire ground connector is in good condition. Use a meter to measure third-

wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground.

• Make sure that the power cord is the correct type.

To view the power cords that are available for the server:

a. Go to:

http://dcsc.lenovo.com/#/

b. Click Preconfigured Model or Configure to order.

ThinkEdge SE350 V2 System Configuration Guide

Table of Contents