Installing And Connecting The Coffee Machine - Miele CoffeeSelect CM 7750 Operating Instructions Manual

Installing and connecting the
coffee machine

Danger of overheating due to
insufficient ventilation.
If the coffee machine is not
sufficiently ventilated, the appliance
can overheat.
Ensure that there is sufficient
ventilation around the coffee
machine.
Do not cover the coffee machine
with tea towels etc. while it is in use.
If the coffee machine is installed in a
niche, heat and moisture will
accumulate inside the niche. This
can result in damage to the coffee
machine and/or furniture unit.
Do not install the appliance in a
niche.
Please observe the following installation
instructions:
- The location of the machine must be
dry and well ventilated.
- The ambient temperature of the room
in which the machine is used must be
between +16 °C and +38 °C.
- Do not place the coffee machine near
a window in direct sunshine or right
next to an appliance that gives off
heat. These would subject the
machine to ambient temperatures
outside its permitted operating range.
- The coffee machine must be set up
on a level surface. The surface must
be water-resistant.
- The appliance door must be opened
completely to remove the brew unit.
Unpacking and installing
 Place the coffee machine in the
location in which you intend to use it.
 Clean the appliance thoroughly
before filling it with mains tap water
and coffee beans.
 Insert the plug of the coffee machine
into the socket (see "Electrical
connection").
 Remove the water container and fill it
with fresh, cold tap water. Only fill the
water container up to the "max."
mark.
 Refit the water container.
Useful tip: The milk tube can be stored
behind the appliance door when not in
use.
23