Miele CoffeeSelect CM 7750 Operating Instructions Manual page 71

 Pull the dispensing unit off towards
you.
 Twist off the upper section  with the
holder for the milk tube. Pull the
component off. Then pull the Y-
shaped piece  off. Remove the
dispensing spouts .
Cleaning the central spout
Clean the central spout's stainless
steel cover by hand only, using
warm water and a little washing-up
liquid.
 Clean all parts thoroughly by hand.
Cleaning and care
Useful tip: With the exception of the
stainless steel cover, all parts of the
central spout should be cleaned in the
dishwasher from time to time to give
them a thorough clean. This will remove
coffee deposits and milk residues
effectively.
 Clean the surfaces of the central
spout with a damp cloth.
 Clean any blockages in the milk
pipework under running water with
the cleaning brush supplied: to do
this, insert the brush in the pipework.
Move it back and forth until all milk
residue has been removed.
Fitting the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
 Reassemble the dispensing unit.
Push the spouts  firmly back onto
the dispensing unit.
Make sure that all parts are tightly
connected to one another.
 Refit the dispensing unit into the
central spout.
 Refit the stainless steel cover.
 Confirm with OK.
71