Cleaning and care
Cleaning the steam jet
Clean the steam jet once a month.
To move the central spout into the
maintenance position, touch for
3 seconds.
Carefully pull the stainless steel cover
off.
Pull the dispensing unit off towards
you.
Push the cleaning brush a max. of
1 cm into the steam jet.
Clean the steam jet with the cleaning
brush.
Refit the dispensing unit into the
central spout.
Refit the stainless steel cover.
Cleaning the cup rim sensor
Clean the cup rim sensor every day.
The cup rim sensor is located
underneath the central spout.
72
Push the two locking catches
together (see arrows).
The cup rim sensor will be released.
Clean the cup rim sensor by hand
with warm water and a little washing-
up liquid.
Dry the cup rim sensor.
To refit:
Push the cup rim sensor from
underneath into the holder on the
central spout.
Cleaning the milk siphon
Clean the milk siphon every day.
Rinse the milk siphon under running
water.
Remove the connecting piece from
the stainless steel tube.
Clean the parts by hand under
running water with a little washing-up
liquid.
If necessary, soak the parts overnight
in water and a little washing-up liquid.
Rinse the parts under running water
afterwards.
Dry the parts.