Utilities - Toshiba Qosmio F30-111 User Manual

Introduction
Standby
TOSHIBA RAID

Utilities

This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility's online manual, help files or
readme.txt files.
TOSHIBA Power
Saver
HW Setup
TOSHIBA Controls
1-12
If you have to interrupt your work, you can turn off
the power without exiting from your software.
Data is maintained in the computer's main
memory. When you turn on the power again, you
can continue working right where you left off.
RAID (Redundant Array of Independent Disks)
realizes high performance (striping = RAID0) or
fault tolerance (mirroring = RAID1), which is
configured by arraying multiple independent hard
disk drives.
To access this power savings management
program, click start, click the Control Panel,
click Performance and Maintenance and click
the TOSHIBA Power Saver icon.
This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To start
the utility, click start and click Control Panel,
click Printers and Other Hardware and click the
TOSHIBA HWSetup icon.
This utility lets you do the following:
■
Buttons: Assign applications to the REC,
Brightness down, Brightness up, DOLBY,
TV-out buttons.
User's Manual