Table of Contents
Advertisement
Optional Devices
PC card
The computer is equipped with a PC card slot that can accommodate one
5 mm Type II card. Any PC card that meets industry standards
(manufactured by TOSHIBA or other vendor) can be installed. The slot
supports 16-bit PC cards, including PC card 16's multifunction card and
CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.
PC cards can sometimes become hot during PC operation. Before you
remove a PC card always wait for it to cool. You could get burned
removing a hot PC card.
Inserting a PC card
Windows hot-install feature lets you insert PC cards while the computer's
power is on.
Do not insert a PC card while the computer is in standby or hibernation
mode. Some cards might not work properly.
To insert a PC card, follow the steps below:
1. Insert a PC card in the PC card slot.
2. Press gently to ensure a firm connection.
3. After inserting the card, refer to the PC card's documentation and check
the configuration in Windows to make sure it is appropriate for your PC
card.
9-2
PC card
PC card slot
Inserting the PC card
User's Manual
Advertisement
Table of Contents
