Table of Contents
Advertisement
Power
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the password.
3. Press Enter.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
Power-up modes
The computer has the following power-up modes:
■
Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk.
■
Standby: Data is maintained in the computer's main memory.
Refer also to the sections
in Chapter 3,
Windows utilities
You can configure various settings associated with both Standby Mode and
Hibernation Mode within TOSHIBA Power Saver.
Hot keys
You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to enter
Hibernation. Refer to Chapter 5,
Panel power on/off
You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power will be turned
on in Standby Mode or Hibernation Mode but not in boot mode.
If the panel power off function is enabled and you use Shut down Windows,
do not close the LCD display panel until the shut down function is
completed.
System Auto Off
This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Standby mode or Hibernation mode in
Windows.
6-16
Turning on the power
Getting
Started.
and
The Keyboard
for details.
Turning off the power
User's Manual
Advertisement
Table of Contents
