Using Optical Media Drives - Toshiba Portege M400 User Manual

Inserting a module
Insert the Ultra Slim Bay Hard Disk Drive adaptor as described below.
1. Insert the Ultra Slim Bay Hard Disk Drive adaptor in the computer as
shown below and press until the ejector mechanism clicks.
2. If you want to lock the Ultra Slim Bay Hard Disk Drive adaptor, place the
Ultra Slim Bay lock screw in the hole for its lock position.
Lock screw
Ultra Slim Bay Hard Disk Drive
adaptor

Using optical media drives

The text and illustrations in this section refer primarily to the optical media
drive. However, operations are the same for other optical drives in the Ultra
Slim Bay. The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows and the Ultra Slim Bay indicator
glows.
Use the WinDVD application to view DVD-Video discs.
If you have a DVD-ROM / CD-R/RW drive, refer also to the
DVD-ROM / CD-R/RW drive
If you have a DVD Super Multi drive, refer also to the
DVD Super Multi drive
When the power of the optical media drive is off, pressing the Fn + Tab
keys will turn the power of the optical media drive on. Furthermore, it is
possible to set it to turn the power of the optical media drive on and eject
the tray at the same time.
User's Manual
Inserting the Ultra Slim Bay Hard Disk Drive adaptor
section for precautions on writing to CDs.
section for precautions on writing to CDs/DVDs.
Operating Basics
Writing CDs on
Writing CD/DVDs on
4-23