Toshiba Portege M400 User Manual page 196

USB floppy disk drive (optional)
For more information, refer to Chapter 4,
Problem
Drive does not operate There may be a faulty cable connection. Check
Some programs run
correctly but others do
not
You cannot access the
external 3 1/2" floppy
disk drive
PC card
Refer also to Chapter 8,
Problem
PC card error occurs
User's Manual
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD™
(single/multi-session),
CD-ROM Mode 1, Mode 2,
CD-ROM XA Mode 2
(Form1, Form2),
Enhanced CD (CD-EXTRA),
Addressing Method 2
Check the region code on the DVD. It must
match that on the DVD Super Multi drive. Region
codes are listed in the
section in Chapter 2, The Grand Tour.
Operating
Procedure
the connection to the computer and to the drive.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software needs.
Try another floppy disk. If you can access the
floppy disk, the original floppy disk (not the drive)
is probably causing the problem.
If problems persist, contact your dealer.
Optional Devices.
Procedure
Reseat the PC card to make sure it is firmly
connected.
Make sure the connection between the external
device and the card is firm.
Check the card's documentation.
If problems persist, contact your dealer.
Troubleshooting
Optical media drives
Basics.
9-11