Toshiba Portege M400 User Manual page 155

HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set
the priority for HDD detection. If the first detected HDD has a boot
command, the system will boot from the HDD.
Built-in HDD 1
-> Built-in
HDD 2 -> USB
(Default)
Built-in HDD 2
-> Built-in
HDD 1 -> USB
Built-in HDD 1
-> USB ->
Built-in HDD 2
Built-in HDD 2
-> USB ->
Built-in HDD 1
USB -> Built-in
HDD 1 -> Built-
in HDD 2
USB -> Built-in
HDD 2 -> Built-
in HDD 1
■
If a boot command is not found on the first detected HDD, the system
will not boot from the other HDD. It will search the next device in the
boot priority for a boot command.
■
Some modules may not be displayed.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
Network Boot Protocol is not displayed for Gigabit Ethernet LAN.
User's Manual
The priority is set as Built-in HDD 1 -> Built-in
HDD 2 -> USB.
The priority is set as Built-in HDD 2 -> Built-in
HDD 1 -> USB.
The priority is set as Built-in HDD 1 -> USB ->
Built-in HDD 2.
The priority is set as Built-in HDD 2 -> USB ->
Built-in HDD 1.
The priority is set as USB -> Built-in HDD 1 ->
Built-in HDD 2.
The priority is set as USB -> Built-in HDD 2 ->
Built-in HDD 1.
[PXE] Sets PXE as the protocol (Default).
[RPL]
Sets RPL as the protocol.
HW Setup
7-5