Alarm Trigger Diagnostics - CrimeStopper The Informer CS-2015FM / TW1 Series Installation Instructions Manual

Table of Contents

Advertisement

(BLUE WIRE GROUNDED)
CS2015FM/TW1
PRESS TOGETHER
The CS-2011RS and CS-2015FM systems include disarm diagnostics, through the LED light, that will help in
determining what caused the last trigger of the alarm system. This is a valuable tool in determining how the vehicle
was tampered with or if there is a false alarm problem in which case you can make the necessary adjustments to
correct the problem.
When the system is disarmed with the remote you will hear the normal 2 chirps, then 4 quick chirps that indicate the
alarm was triggered while you were away. Check the LED light for a sequence of flashes:
Shock Sensor Violation = 1 Flash
Hood/Trunk = 3 Flashes
Diagnostics will reset when the Ignition is turned on or when the system is re-armed.
PROGRAMMING DIAGRAM
IGN
OFF
START
FLASH 2, 3, or 4 X's
CS2011RS

ALARM TRIGGER DIAGNOSTICS

23
PRESS 4X's
OFF
Door Violation = 2 Flashes
Ignition Violation = 4 Flashes
WAIT FOR
4 FLASHES
IGN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Super rage cs-2011rs series

Table of Contents