Table of Contents
Advertisement
<Menu>
<Default Function> or <Selected Function>
<Auto Shutdown Time>
Set a timer to automatically shut down the machine after a specified period of idle time has elapsed since the machine
entered the sleep mode.
<Set This Function>
<Off>
<On>
<Set Time>
1 to 4
to 8 (hr.)
<Menu>
set the Auto Shutdown time
Before setting <Auto Shutdown Time>
●
When the <Auto Shutdown Time> setting is enabled, the machine may automatically shut down even if you
are operating the machine from the Remote UI or from the Send Function Setting Tool. A malfunction may
occur, particularly if the machine shuts down while data is being imported. When you import data using the
Remote UI or use the Send Function Setting Tool, set <Auto Shutdown Time> to <Off> in advance.
●
If any settings of the [Timer Settings] are changed from the Remote UI while the machine is in the sleep
mode, the timer for the <Auto Shutdown Time> setting is reset to the beginning. The machine automatically
shuts down after a specified period of idle time has elapsed since the timer was reset.
<Auto Sleep Time>
If the machine has not been operated or has had no data to process for a specified period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power.
Entering Sleep Mode(P. 182)
1
to 60 (min.)
Setting Menu List
<Preferences>
<Timer/Energy Settings>
<Preferences>
<Timer/Energy Settings>
<Apply>
<Function After Auto Reset>
<Auto Shutdown Time>
468
Select
Select <On>, and
Advertisement
Table of Contents
