Table of Contents
Advertisement
Entering Destinations Directly
For a destination that is not registered in the Address Book, specify it by entering a fax number.
1
Enter the fax number in the <Enter Dest.> tab.
●
If your machine is connected to a PBX (Private Branch Exchange), select <R> before entering the destination.
If <R> is not available, you need to register the R-key settings.
●
If you have entered an incorrect value, use
Adding a destination
●
To enter a second or subsequent destination, select <Next Dest.>.
If a confirmation screen appears
●
When <Confirm Entered Fax Number> is set to <On>, the input screen reappears so that you can
confirm the destination (
again.
Sending a fax abroad
●
Enter the international access code, the country code, and the fax number to specify the destination.
If you are not able to successfully connect to a recipient, select <Pause> and insert a pause between
numbers.
Specifying Destinations in an LDAP Server
●
You need to specify the settings for connecting to an LDAP server beforehand.
Servers(P. 65)
1
Select <LDAP Server> in the <Specify Destination> tab.
2
Select the LDAP server you are using.
3
Select conditions for user information to be searched.
Faxing
to clear it.
Confirming the Entered Fax Number(P. 417) ). Enter the destination
If your office has an LDAP server installed, you can specify a destination using user
information in the server. Access the LDAP server via the machine to search for the
appropriate user information and specify it as destination.
225
<R-Key Setting>(P. 568)
Registering LDAP
Advertisement
Table of Contents
