Table of Contents
Advertisement
<24 Hour>
<Menu>
setting
<Auto Reset Time>
If a key is not pressed for a specified period of time, the screen and the settings are initialized to display the
default screen (Auto Reset). Specify the interval at which the Auto Reset is performed. The Auto Reset is not
performed in the following cases:
●
The setting menu is displayed.
●
The machine is processing data, such as when printing documents or sending or receiving faxes.
●
An error message is displayed and the Error indicator is blinking (However, Auto Reset is performed when the
error does not prevent the user from continuing to use a function.)
<Set This Function>
<Off>
<On>
<Set Time>
1 to 2
to 9 (min.)
<Menu>
This Function>
●
The screen displayed after the Auto Reset is performed can be selected in <Function After Auto Reset>.
<Function After Auto Reset>
Select whether to return the display to the default screen after the Auto Reset is performed. If <Default Function> is
selected, the main screen of the function selected in <Default Screen After Startup/Restoration> is displayed (
<Default Screen After Startup/Restoration>(P. 459) ). If <Selected Function> is selected, the display returns to the
main screen of the function that was selected.
<Default Function>
<Selected Function>
Setting Menu List
<Preferences>
<Timer/Energy Settings>
<Preferences>
<Timer/Energy Settings>
Enter the time in <Set Time>
<Time Format>
<Auto Reset Time>
<Apply>
467
Select the display
Select <On> in <Set
Advertisement
Table of Contents
