Advertisement
TA indicator
INFO. indicator
RDS indicator
NEWS indicator
SURROUND
PTY indicator
indicator
EON indicator
| TP indicator
KRA-V6090/KR-V5090 (En)
3 STEREO
indicator
MEMORY
indicator
Source Direct
TAPE 2 indicator
=
TA NEWS
N.B. circuit
indicator
TP SURROUND
3 STEREO
aa indicator
S.DIRECT
a
AUTO |
MHz: fete
AUTO tuning/AUTO
STEREO
indicators
indicator
KENWOOD
AUDIO-VIDEO SURROUND RECEIVER KR-V60S0
REMOTE POWER
'ON/STANOBY
MAIN POWER
)MAIN POWER switch
Press to switch the main power ON/OFF.
)REMOTE
POWER
key
Press to switch
over the STANDBY/ON
modes when the MAIN POWER
is ON.
)STANDBY indicator
SRS 3D indicator
Lights when the SRS 3D system is ON.
)SPEAKERS
indicator
Lights when the speakers are ON.
¥STEREO key
Press to turn the surround mode OFF.
— (302
Ra
YDOLBY PRO LOGIC key
(28
yDOLBY 3 STEREO key
~ (30.
)SRS 3D key
-Bn
INPUT SELECTOR knob
Rotate to select the input source.
YVOLUME
CONTROL
knob
yPHONES jack
Piug headphones into this jack.
Broadcast band
ft
Input display,
Frequency display,
Preset channel display,
Surround mode display
AUTO
_OIRECT MEMORY
Se ea NE
cS
TS
a |
ON
OFF
lam
—
=
=
=
at
@AUTO
key
Press to select the tuning mode from the
auto tuning and manual tuning modes.
ark
Press and hold the AUTO key for more than
2 seconds to switch the VIDEQO1 display to
another input display.
—(i2:
@SPEAKERS
key
Press to turn the speakers ON and OFF.
@ DIRECT key
—(18-
Press when tuning a broadcast station by
entering the digits of its frequencies.
® TA/NEWS/INFO. key
—{24,
Used in receiving RDS broadcast.
@PTY key
(22,
Used in receiving RDS broadcast.
@ MEMORY key
"20.
Used when storing RDS stations in the pre-
set memory using the Auto Memory func-
tion. Also used when storing any radio sta-
tions manually.
20
@® Numeric keys (1 to 0, +10)
— 18.
PRO LOGIC
STEREO
qreseercsee sent
'a STEREO
SRg.30
TUNED indicator
stereo reception indicator
@
ES
| Tees
SS
INPUT SELECTOR
VOLUME CONTROL
=|
~ (8.
bay
@ BAND key
Press to switch the broadcasting band.
@ DISPLAY key
Press to switch the RDS display contents.
~(_19
Press and hold the DISPLAY key for more
than 2 seconds to switch the display bright-
ness.
@TUNING keys(v,
A)
Press to select a radio station.
@TAPE 2 MONITOR
key
Press to monitor the sound being recorded,
etc,
@+10/PTY SEARCH
key
~([ 23.
This key functions as the PTY SEARCH key
during RDS broadcast reception.
@N.B. key
(4.
Press to compensate for the insufficiency in
the base sound.
@P.CALL keys (v,
A)
Press to select one of the preset Stations.
€ SOURCE
DIRECT key
Press to listen to the source sound with a
higher sound quality.
|
417.
—(16-
core
-2
[14
'TANDBY position of the REMOTE POWER key
then the STANDBY indicator of this unit is lit after its power cord has been plugged into wall outlet and the MAIN POWER switch has been pressed
-ON, a small amount of current is supplied to back up the internal memory of the unit. This status is referred to as the standby mode of the unit. While
e STANDBY indicator is lit, the POWER can be switched between ON and STANDBY from the remote control unit.
fhen the unit is not to be used for a long period of time, press the MAIN POWER key to OFF.
Advertisement
