Advertisement
KR-V6090/KR-VSOS0 [En}
Switch ON the power of the main unit.
2 Select the component to be remote controlled
with one of the controlled component selection
keys.
Refer to the remote control key correspondence
table below and press the key for the desired
operation.
~
@ Pressing the POWER key of the remote control unit while the STANDBY
indicator is lit turns the power ON. Press the desired key after the
power has been turned ON.
@ When
two operation
keys of the remote
control unit are pressed
successively, press each key securely reserving an interval of more
than 1 second for each press.
Controlled component
selection key
(When used with a MD)
ElOperation key
Model: RC-R0505
Infrared ray system
Remote
* sensor
e *': No remote control key is marked
MD, but the
TAPE1 key can be used to control a MD player by
switching
the display of the main unit from VIDEO 1
to TAPE1
then to MD.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
112
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
Notés
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. insuch
a case, change the system installation position to prevent the malfunction.
Advertisement
