Advertisement
KA-VB080/KR-V5080 [En)
Nhen recording sound with a recorder component of KENWOOD, synchro recording is possible by setting the INPUT SELECTOR
-o select TAPE1 or MD according to the connected component.
Preparation
e Switch the VIDEO1
display to TAPE?
or MD with the following
Each press switches the display.
@ Press and hold the AUTO key for more than 2 seconds.
To record a music source
@ Select the source to be recorded.
INPUT SELECTOR
The input sources are switched in the following order:
TUNER
(frequency display)
1
& PHONO
(i
\
@ VIDEO1 (TAPE! or MD)
4 CD
S VIDEO2
Select an input
source other than
TAPE 1.
e The VIDEO!
display can be switched to the display of other input by
2
using the procedure described in "Preparation" above.
8 oe
cassette deck in record-pause
@ For the synchro recording with a cassette deck and/or MD recorder,
mode.
refer to the respective instruction manuals.
¢
@ itis not possible the VIDEO1 or MD input to TAPE1 because all of these
@ Play the source and start recording.
components should use the same INPUT SELECTOR position.
e@ For the caution in EON reservation:
:
~(25.
Lights
@ Press the TAPE 2 MONITOR key.
e
TUNING
_TAPE2
|
|
BAND DISPLAY V-
A_MONITOR
sone
|
Tare 22 i
' :
|
@ Select a source other than TAPE 1.
INPUT SELECTOR
@ Play cassette deck 2 and start recording
e For copying a tape using a double cassette deck, read the instruction
on cassette deck 1.
manual of the double cassette deck.
Copying tape (Tape dubbing TAPE 1— TAPE 2)
@ Select TAPE 1 with the INPUT SELECTOR control of the main |:
unit.
recording of the cassette deck connected to the TAPE 2 jacks.
Regarding TAPE 2 MONITOR
you connected for further details.
Advertisement
