Advertisement
KR-V60S0/KR-VS080 [En]
'he surround modes allow you to enjoy the feeling of presence in music. Select the mode according to the source or components
layed. For the connections of the surround and/or center speakers, refer to "Connection of speakers".
6.
DOLBY PRO LOGIC surround mode
Video, DVD and LD software programs carrying
the [{] [betsy sunncuno] mark contain recording of
the same Dolby Surround data as those used in
movie theaters.
The DOLBY PROLOGIC surround mode uses the
Dolby Surround data and brings into home a
similar sound field with full of presence to movie
theatres.
To use this mode, connect the surround
(and
center) speakers.
In case center speaker is not used
|
Center speaker
al
Front speaker
Front speaker
Surround speaker
Surround speaker
DOLBY 3 STEREO mode
If the left and right speakers are installed apart from each other,
the center acoustic image (words, etc.) may vary depending on
the listener's position. The DOLBY 3 STEREO mode provides an
improved positioning of the center acoustic image regardless of
the listening position.
Use this mode when playing videotape, DVD or LD soreware
carrying the D{J[cosy surround] mark.
To use this mode, connect the center speaker.
Center speaker
Front speaker
Recommended speaker installation
It is recommended that the surround speakers are installed straight to the left and right of the listening position or slightly behind, at a height
of about 1 meter higher than the listener's ears. Each surround speaker should be installed so that the longer sides are horizontal.
|
Advertisement
