Listening To Radio Broadcasts; Preset Tuning Ызын; Listening To Broadcast Stations Which Have Not Been - Panasonic RX-DT770 Operating Instructions Manual

16
Listening to Radio Broadcasts
Preset tuning
Make sure you have completed the procedure for "Programming
Broadcast Stations". (See page 15 beforehand).
To listen to a station without programming it first, refer to "Listening
to broadcast stations which have not been programmed". (See right.)
Using the main unit
1 Press TUNER/BAND to dis-
play "ЕМ" ог "АМ".
г" АМ — FM —]
(The display changes each time the but-
ton is pressed.)
Press v PRESET TUNING ^
to select the preset channel.
The station is changed each time the
button is pressed.
dar M HB!
j
2 - TUNING +
Listening to broadcast stations which have
not been programmed (Manual tuning)
I 2
4
р—= у —
Ш)
Press TUNER/BAND to dis-
play "FM" or "AM".
C AM — FM =]
{The display changes each time the but-
ton is pressed.)
J TUNER/BAND
Press — TUNING + to tune in
the broadcast station.
+: Press this to increase the broadcast
frequency.
—: Press this to decrease the broadcast
frequency.
FM stations can be selected automati-
cally (see below).
- TUNING +
HH i
Lights when a station
is tuned in properly
Lights when an FM stereo
program is picked up.
Selecting FM stations automatically:
Keep the button depressed until the frequency display starts to
change. A station with good reception is automatically selected and
the selection process then stops.
Frequency display steps:
The frequency display changes in the following steps:
FM: 200 kHz/100 kH2 steps І
AM: 10 kHz steps
(To change the allocation settings, see page 15.)