Table of Contents
Advertisement
Locking the vehicle
1.
Lock all doors except the driver's door with
the integrated key using the side door lock
on the front of the doors.
2.
Close the locked doors.
3.
Using the integrated key, lock the driver's
door lock clockwise.
4.
Close the driver's door.
Alarm system
If the vehicle is unlocked with the integrated
key via the door lock, the activated alarm sys-
tem will be triggered when the door is opened.
In this case, use the vehicle key emergency
detection to switch off the alarm.
If the doors are manually locked from the in-
side, the alarm system is not activated.
Online Edition for Part no. 01405A8A5A2 - VI/23
Opening and closing
Emergency detection of the vehicle
key
It is not possible to switch on the drive-ready
state if the vehicle key has not been detected.
Proceed as follows in this case:
1.
Hold the rear of the vehicle key against the
mark on the steering column. Pay attention
to the display in the instrument cluster.
2. ▷
If the vehicle key is detected:
Turn on drive-ready state within 10 sec-
onds.
▷
If the vehicle key is not detected:
Slightly change the position of the vehi-
cle key and repeat the procedure.
Malfunction
A Check Control message is displayed where
applicable.
Vehicle key detection by the vehicle may mal-
function under the following circumstances:
▷
The battery of the vehicle key is discharged.
▷
Fault of the radio link from transmission
towers or other equipment with high trans-
mitting power.
▷
Shielding of the vehicle key due to metal
objects.
Do not transport the vehicle key together
with metal objects.
▷
Fault of the radio link from mobile phones
or other electronic devices in direct proxim-
ity to the vehicle key.
CONTROLS
77
OwnersManuals2.com
Advertisement
Table of Contents
