Table of Contents
Advertisement
CONTROLS
Displaying stored Check Control
messages
Additional information such as the cause of a
fault or the required action can be called up via
Check Control.
Depending on the Check Control message, fur-
ther help can be selected.
1.
Apps menu
2.
"Vehicle"
3.
"Vehicle status"
4.
"Check Control"
5.
Select the desired text message.
Display
A Check Control message is displayed in the
instrument cluster as a text message with an
icon.
For urgent messages, an added text is auto-
matically displayed on the control display.
If several faults occur at once, the messages
are displayed consecutively.
Certain messages displayed while driving are
displayed again after drive-ready state is
switched off.
Icons in the instrument cluster indicate
an active or saved Check Control mes-
sage.
142
Displays
Online Edition for Part no. 01405A8A5A2 - VI/23
Indicator lights and warning
lights
Principle
The indicator lights and the warning lights
on the instrument cluster show the status of
some functions in the vehicle. The indicator
and warning lights indicate faults in monitored
systems.
General information
Indicator lights and warning lights can illumi-
nate in a variety of combinations and colors.
Several of the lights are checked for proper
functioning and illuminate temporarily when
drive-ready state is turned on.
Red lights
Seat belt reminder
Seat belt on the driver's seat is not
buckled.
Additional information:
Seat belt reminder, refer to page 108.
Airbag system
Warning light illuminates briefly: Indi-
cates that the entire airbag system and
seat belt tensioners are operational
when drive-ready state is switched on.
Warning light does not illuminate or illuminates
continuously: the airbag system or the seat
belt tensioners may be not be operational.
Have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
Additional information:
Airbags, refer to page 171.
OwnersManuals2.com
Advertisement
Table of Contents
