BMW 5 Series 2023 Owner's Manual page 230

CONTROLS
▷ Poorer recognition of vehicles and lane
boundaries.
▷ Short-term interruptions in case of already
detected vehicles and lane boundaries.
Drive attentively, and react to the current sur-
rounding traffic situation. If necessary, inter-
vene actively, for instance by braking, steering
or making an evasive maneuver.
Lane Change Assistant
Principle
The Lane Change Assistant also assists when
changing lanes on multi-lane roads.
General information
The system uses the Assisted Driving Mode
sensors.
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Federal, state, or local laws may differ, and
the use of this function may be prohibited or
limited. Before use, check federal, state, and
local laws.
The Assisted Driving Mode alerts also apply.
Additional information:
Assisted Driving Mode, refer to page 226.
230
Driver assistance systems
Online Edition for Part no. 01405A8A5A2 - VI/23
Functional requirements
▷ The functional requirements for Assisted
Driving Mode have been met.
Assisted Driving Mode, refer to page 226.
▷ Driving on a road without pedestrians or cy-
clists and with physical barriers to oncom-
ing traffic such as crash barriers.
▷ A vehicle has been detected at a sufficient
distance behind your own vehicle since be-
ginning the drive.
▷ Crossable lane boundaries are detected.
▷ Maximum speed approx.
110 mph/180 km/h.
▷ The minimum speed is country-specific.
Turning on/turning off Lane Change
Assistant
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Assisted Driving"
7. "Automatic Lane Change"
The settings for the Automatic Lane Change
Assistant can be configured, depending on ve-
hicle equipment and national-market version.
Changing lanes
1. Ensure that the traffic situation permits
changing lanes.
2. Start the lane change.
▷ To initiate the lane change, press the
indicator stalk in the desired direction to
the resistance point.
▷ Depending on the vehicle equipment,
the indicator/high-beam stalk can also
be pressed beyond the resistance point.
▷ Depending on the vehicle equipment,
the lane change can already be started
OwnersManuals2.com