Table of Contents
Advertisement
Warning
The protective effect of safety gear, including
seat belts, may not be fully operational or fail
in the following situations:
▷ The seat belts or seat belt buckles are
damaged, soiled, or changed in any
other way.
▷ Seat belt tensioners or roll-up mecha-
nism were modified.
Seat belts can be imperceptibly damaged in
the event of an accident. There is a risk of
injury or danger to life. Keep clean and do
not modify seat belts, seat belt buckles, seat
belt tensioners, roll-up mechanisms, and belt
anchors. After an accident, have the seat
belts checked by an authorized service center
or another qualified service center or repair
shop.
Correct use of seat belts
▷
Wear the seat belt tight to your body over
your lap and shoulders, without twisting it.
▷
Wear the seat belt deep on your hips over
your lap. The seat belt must not press on
your stomach.
▷
Do not rub the seat belt against sharp
edges, or guide it or jam it in across hard
or fragile objects.
▷
Avoid thick clothing.
▷
Re-tighten the seat belt frequently upward
around your upper body area.
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A8A5A2 - VI/23
Buckling the seat belt
1.
Guide the seat belt slowly over shoulder
and hip to put it on.
2.
Insert the buckle tongue into the seat belt
buckle. The seat belt buckle must engage
audibly.
To ease accessibility to the seat belt buckle, an
adjustable slider is available on the belt to help
position the buckle when not in use.
Unbuckling the seat belt
1.
Hold down the seat belt firmly.
2.
Press the red button in the seat belt buckle.
3.
Guide the seat belt back into its roll-up
mechanism.
Middle seat belt in the rear
Buckling the seat belt
CONTROLS
107
OwnersManuals2.com
Advertisement
Table of Contents
