Tools Needed - Craftsman 315.22839 Owner's Manual

The following tools are needed for assembly and alignment. Note: The five hex keys listed below have been
provided with your saw. The remaining tools are typical shop tools and are not included with your saw.
8MALL / MEDIUM
PHILLIPSSCREWDRIVER
NUTDRIVER
8 ram,10 ram,and 12 mm
HEXKEY8 (PROVIDED)
and 6 mm
COMBINATION SQUARE
HAMMER
45°TRIANGLE
WREN_HES:8 ram,10 ram,and 12 mm
,_, "
FRAMINGSQUARE
13 rRRF'rSMRN*TABLE SAW 315.228390