Service; 4: Fcc Emission Classifications - Panduit PDM Operation Manual

© Panduit Corp. 2013
5. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool's operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control.
7. Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
3F: Service
•
Have your power tool serviced by a qualified repair person using only identical replacement
parts.
Contact Panduit Tool Service at the following locations:
Panduit Tool Division (USA)
1350 Lakeside Drive
Romeoville, IL 60446
888-506-5400, ext. 83255
This will ensure that the safety of the power tool is maintained.

4: FCC EMISSION CLASSIFICATIONS

USA FCC Emissions for Class A
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesirable operation.
Canadian Emissions for Class A
This Class "A" digital apparatus meets all requirements of the Canadian Interference Causing
Equipment Regulations.
Cet appareil numérique de la classe "A" respecte toutes les exigencies du Règlement sur le matériel
brouilleur du Canada.
European Emissions Warning for Class A
Product is not intended for use in a residential environment. Use of this product in residential areas
may cause electromagnetic interference.
The information contained in this manual is based on our experience to date and is believed to be reliable. It is
intended as a guide for use by persons having technical skill at their own discretion and risk. We do not
guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for
reference purposes only. For specific dimensional requirements consult the factory. This publication is not to be
taken as a license to operate under, or a recommendation to infringe any existing patents.
OPERATION MANUAL
Panduit EMEA Service Center (EUR)
EMEA Tool Service Center
Bedrijvenpark Twente 360
7602 KL Almelo
tel + 31 546 580 451
Page: 7 of 39
PAT1M, PAT1.5M, PDM
ENGLISH