Nokia 2700c-2 Service Manual page 82

Programming is completed when Flashing Completed message is displayed.
The product type designator and MCU SW version are displayed in the status bar.
SW Update window and then choose File→Close Product .
vi Close the
Request file.
2. Create a
For this procedure, you must supply +12 V to CU-4 from an external power supply.
i To connect the phone with
ii Choose Tools→Certificate Restore .
iii To choose a location for the request file, click Browse.
Page 3 –38
Phoenix , choose File→Scan Product .
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
RM-561
Issue 1